December 12, 2013
See our straight edge testing in action in this video from Face Consultants.
Straight Edge Tests can be carried out to check for compliance with British Standards BS8204 Part 2 : 2003 to see if the SR1, SR2, or SR3 classifications are being achieved. These are usually but not always specified in retail units where tiling is to be received. We can also carry out a Straight Edge Tests using a 3m Straight Edge, on feet, for checking plus or minus deviations from a given number over a 3m length. For example, checking for no more than plus or minus 5mm under a 3m Straight Edge.
Find out more about our surface regularity testing services.
"We took the decision at the very early stage to..."
Chief Financial OfficerAl Muqarram Auto Parts Trading, Dubai
"Just a note to thank you and your colleagues for..."
Project Manager McElroy Associates
"Thanks for your assistance this week, Jordan has been extremely..."
Contracts Director Level Best Concrete Flooring Ltd